Consumer
Products
Philips SensoTouch Wet and dry electric shaver RQ1168/30 DualPrecision heads 50 min Oil-control cleansing brush with Aquatec

Philips SensoTouch Wet and dry electric shaver RQ1168/30 DualPrecision heads 50 min Oil-control cleansing brush with Aquatec

RQ1168/30

Troubleshooting

Why isn’t the shaver entirely clean after it was cleaned in the Jet Clean System?

  • The cleaning fluid in the jet cleaning chamber may be soiled. Empty and rinse the cleaning chamber.
  • The cleaning fluid level may be too low. If the fluid volume in the cleaning chamber drops below the minimum level during the cleaning program, the program aborts.
  • You may have used another cleaning fluid than the original Philips cleaning fluid. Only use HQ200 cleaning fluid.

The information on this page applies to the following models: RQ1168/30 , RQ1167/16 , RQ1295/16 , RQ1258/21 , RQ1257/21 , RQ1257/16 , RQ1187/21 , RQ1187/16 , AT928/16 , RQ1295/21 , AT911/16 , RQ1195/22 , RQ1185/24 , RQ1285/17 , RQ1275/17 , AT910/16 , AT890/26 , AT891/16 , AT940/20 , PT860/14 , PT920/21 , PT920/18 , PT870/14 , AT890/17 , PT860/15 , PT920/22 , PT920/19 , PT870/15 , RQ1160/17 , RQ1280/17 , RQ1260/17 , RQ1250/17 , RQ1180/17 , RQ1160/16 , RQ1280/22 , RQ1280/21 , RQ1280/16 , RQ1260/22 , RQ1260/21 , RQ1260/16 , RQ1250/21 , RQ1180/16 , RQ1160/21 , RQ1050/29 , RQ1075/23 , RQ1085/21 , RQ1076/21 , RQ1050/16 , RQ1095/22 , RQ1085/22 , RQ1060/20 , RQ1290/21 , RQ1290/23 , AT890/16 , AT940/18 , RQ1195/21 , RQ1250/16 , RQ1295/23 . more less

Not what you are looking for?

Did we answer your question?

If not, contact us.