Consumer
Products
Pressurised steam generator

Pressurised steam generator

CarryLock GC6530/02

Frequently Asked Questions

Can I fill my Philips Steam generator's water tank while ironing?

No, you cannot fill your Philips Steam generator's water tank while ironing. Find out how and when you can fill the water tank.

Warning

Your Philips Steam generator builds up pressure in its boiler. Opening the filling cap when it is turns on may lead to hot water or steam scalding

Quickly refill the water tank

1) Set the on/off switch of the appliance to “ON”. Press the steam trigger until you no longer hear any steam escape from the iron.
This depressurized the boiler inside the appliance.

2) Remove the plug from the wall socket and slowly unscrew the cap of the tank by turning it anticlockwise. The pressure in the tank is now released.

3) Wait for approximately 15-20 minutes for the appliance to cool down before refilling it.

  • If you fill the tank immediately without cool down period, hot water might splash from the filling hole as the boiler of appliance is still hot enough to convert water into steam.

4) Fill the tank with water, and screw the cap back onto the tank. You can now switch the iron back on again. The iron will need about 4 to 5 minutes to reheat.

Refilling the water tank

The information on this page applies to the following models: GC6530/02 , GC6510/02 , GC6540/02 , GC6430/02 , GC6360/02 . more less

Not what you are looking for?