Follow the steps below to disinfect your Philips shaver using your Philips UV Cube:

 

1. Clean your shaver under the tap, including opening the shaving unit to rinse the bottoms of the shaving heads.
2. Leave the shaving unit open and allow it to air dry for at least 12 hours. Note: using the UV Cube when the shaving heads are still wet may result in an unpleasant residual odor. 
3. Pull the shaving unit off your shaver handle and place it into the UV Cube, ensuring the shaving heads are aligned with the LEDs inside the Cube.
4. Close the lid of the UV Cube, make sure that it’s connected to a power source, and press the power button once. 
5. The disinfecting process takes approximately 10 minutes. The power button light will pulse pink/purpose during this process. Do not open the lid during disinfection.
6. When disinfection is complete, the power button light will switch off, and you can open the cube and remove the shaving unit.

Your shaver is now ready to use.

The information on this page applies to the following models: UVC10/00.