What issues in Philips TV are solved with a software upgrade?

1. Press the [Home] button on the remote control to access the home menu
2. Use the [Cursor buttons] to select [Setup] and press the [OK] button to confirm
3. Select [Software settings] and press the [OK] button
4. Select [Current software info] and press the [OK] button to display the current software version on your TV set

Check the software version against the latest TV software on the Philips support website. Refer to the SOFTWARE & DRIVERS section.

1. If the TV software version is lower than the version posted on the website, this means the software of your TV set needs to be upgraded
2. Follow the instruction in the user manual or readme file of the firmware upgrade on how to upgrade your software
3. Do not install a lower version of software than the current version installed on your product. Philips cannot be held liable or be made responsible for problems caused by a software downgrade.

Note: Each release contains all solutions identified in the earlier version.

Important: There is a new improvement made in the new software release to improve the channel search efficiency, which required the TV channels to be reinstalled when you update the TV software from version TPM62E＿2.08 (or older) to version TPM62E＿2.12 (or later). After you have reinstalled your TV channels, you can rearrange the channels to suit your preference in the channel grid with the Reorder feature in the options menu.

TPM62E_2.26 (Date published: 2013-03-28)

• Fixed Romania DVB-C teletext issue

TPM62E_2.25 (Date published: 2012-09-12)

• TV does not response to the remote control when you switch to France 24 or Balkan TV channels via Teledünya digital service provider (Only applicable to Turkey)
• Picture freezes and TV does not response to the remote control when you switch to Mezzo channel (Only applicable to Serbia)
• TV has no video after startup when you connected a set-top box (STB) through HDMI (Only applicable to France)
• YouSee channel allocation (Only applicable to Denmark)
• Changed the default [Visual impaired] option from on to off

TPM62E_2.24 (Date published: 2012-04-30)

• TV turns off and on by itself while watching DI.TV channels (Only applicable to Italy)
• Stofa cable provider option is added to the DVB-C installation cable provider list (Only applicable to Denmark)
• Missing UPC channels (Only applicable to Netherlands)
• Picture freeze when you playback motion .jpeg file
• A different audio is heard on some digital channels (Only applicable to Mauritius)

TPM62E_2.22 (Date published: 2012-03-30)

• Corrected the OSD error from “Digital Crystal Clear” to “Pixel Plus HD” under [Setup] > [TV settings] > [Picture]

TPM62E_2.21 (Date published: 2012-03-01)

• Introduction of new product ranges

TPM62E_2.20 (Date published: 2011-12-02)

Important: You are highly recommended to upgrade your TV to this software as it covers major certification.

• TV turns off and on by itself while watching channel NT1 (Only applicable to France)
• Digital service provider selection is provided in the channel installation menu (Only applicable to Denmark)

TPM62E_2.18 (Date published: 2011-10-18)

• Introduction of new product range (40PFL5206H/XX)
• Intermittent sound lost when you connect an external device via HDMI
• Multifeed option is disabled in Sky channels (Only applicable to Germany)

TPM62E_2.16 (Date published: 2011-09-06)

• No program on S02 and S03 channels (Only applicable to Germany)
• Change the default picture format to [Wide screen]
• Channel list update message pops up after switching channels
• Intermittent sound lost while watching digital cable (DVB-C) channels

TPM62E_2.15 (Date published: 2011-08-23)

• With this software your TV is ZIGGO and UPC certified
• Introduction of new product range
• Russian OSD translation error is corrected
• Romanian OSD translation error is corrected

TPM62E_2.12 (Date published: 2011-07-29)

• With this software your TV is Saorview certified (Only applicable to Ireland)
• Enable channel reorder function for all service providers except Ziggo (Only applicable to Netherlands)
• Allow users to disable the “4 hours automatic shut down” feature in the [Auto switch off] menu

TPM62E_2.08 (Date published: 2011-06-16)

• Improvement on the OSD translation
• Improved Active Control Demo behaviour
• FIND key does not display the channel grid
• TV has no sound after switch on by power switch
• TV turns off and on by itself during USB playback

TPM62E_2.03 (Date published: 2011-06-10)

• Improvement on the OSD translation

TPM62E_2.00 (Date published: 2011-05-04)

• Initial production software