Philips Avent Classic PES baby bottle SCF666/27 1 Bottle 11oz/330ml Variable flow nipple 3m+



My Philips Avent feeding bottle is leaking

Philips Avent bottles might leak from under the locking ring for more than one reason. Find out how to fix it yourself.

Tips and tricks

Following the guidelines below will help to avoid a leak:

1) Always assemble the teats under wet conditions.

  • If the teat is dry: wet the base with pre-boiled water before pulling the teat through the screw ring, to ensure the skirt will slip easily into place inside the neck of the bottle and form a seal

2) Check that the top section has not been over-tightened, as this can distort or trap the anti-colic skirt, which will not allow the proper operation of the one-way valve.

3) Ensure formula powder is not present on the inside top fraction of the bottle.

  • Remove any debris or residue that may collect around the rim of the bottle base before assembly

Tip 1: the teat

Make sure the teat is wet when assembling the bottle

Tip 2: placing the teat

Place the teat in the screw ring and pull through by the teat until a click is heard

Assembling the teats and rings

Tip 3: position cap

Check that the top section is fixed properly

Teat correct position

The information on this page applies to the following models: SCF666/27 .

Not what you are looking for?

Did we answer your question?

If not, contact us.