Marathon Bagless vacuum cleaner

2200W, 440W suction power, HEPA 13 filter, Parquet, AutoClean FC9225/01


My Philips Marathon vacuum cleaner will not switch on

In the unfortunate event your Philips Marathon vacuum cleaner will not switch on, we are here to help you. Just follow these simple steps.

Possible cause

The filter cylinder unit has probably not been properly inserted into the dust bucket.


Please follow the steps below to be able to switch on the vacuum cleaner again

  1. Unplug the vacuum cleaner
  2. Remove the filter cylinder unit from the bucket
  3. Make sure the filter cylinder has been fitted properly in the filter cylinder case; It must lock into place with a click
  4. Insert the filter cylinder unit back into the bucket
  5. Firmly close the appliance; The cover must close with a click
  6. Insert the mains plug properly into the wall socket

You can find more information in the user manual. If the above solution did not help to solve your problem, please contact Philips Consumer Care.

The information on this page applies to the following models: FC9225/01 , FC9204/01 , FC9200/01 , FC9228/01 . more less

Not what you are looking for?

Did we answer your question?

If not, contact us.